Safety Inspection App for Plants, Sites and Field Crews

Run safety inspections offline, bind every finding to a photo and a location, and close them out with an e-signed approver.

Yellow safety helmets laid out on a workshop floor

What gets in the way, and what fixes it

The worst hazards are in the places with no signal
Offline-first capture on Android, iOS and the browser
The photograph and the finding live in different places
Evidence bound to the row that raised it
Inspectors skip the questions they think do not apply
Rules engine executing on the device
The inspection cycle depends on who remembers it
Scheduled dispatch, broadcast and pull assignment

How it runs

  • The planned inspection round, dispatched instead of remembered

    The inspection cycle stops depending on who remembers it, and "which areas were missed last month" becomes a number instead of an assumption.

  • A finding with an owner, a clock and proof of closure

    Every finding has a named owner, a clock and evidence of closure, and the inspection record and the corrective action are one linked chain rather than two systems that have to be reconciled.

  • Pre-use equipment and PPE checks at the point of work

    Pre-use checks take under a minute at the equipment, are provably tied to the asset and the location, and a failed item stops the job in the moment rather than in the monthly review.

Common questions

Will the inspection app work in a plant room, a basement or a remote site with no signal?

Yes. Capture is offline-first by design. The form definition, its reference data and the compiled rule logic are downloaded to the device before the inspector starts, and completed inspections, including photographs and audio notes, are stored locally and uploaded when the device regains connectivity. The inspector is never blocked, and no partially completed inspection is held on the server waiting for them.

How do we stop inspections being filled in from the office?

Several controls stack. A barcode-scanner question binds the check to the asset or location tag being inspected. A geo-control question records where the inspection was completed, and where the form has geo-tagging enabled the submission carries the coordinates captured when it was accepted. A proximity rule compares the current location against a target within a set radius and warns or blocks when the inspection is being filled in away from the place it describes. None of these make dishonesty impossible, but they make it visible in the record rather than invisible.

Does a failed item automatically become a corrective action with an owner and a due date?

Yes, and it is a real workflow rather than a flag. A dispatch node running in foreach mode creates one corrective-action form per finding row, pre-bound to the parent submission and its photograph. Routing is conditional on severity, a wait node holds the approval open for the agreed window, and escalation reassigns the task to the next approver when that window lapses. Closure is an approval that can require an e-signature, and rejecting it sends the action back for rework instead of closing it.

We already have dozens of site-specific checklists. Do we rebuild every one by hand?

Mostly not. Forms are built from pages, sections and questions in a drag-and-drop builder with around 28 question types, and any form can be cloned and adapted rather than rebuilt. Rather than maintaining a separate checklist per site, keep one published form and use rule groups: the dispatch selects which groups of rules are active, so a stricter site gets extra mandatory questions on the same form everyone else uses, and the results still aggregate. There is also assisted import that reads an existing paper form and proposes matching question types as a draft, that feature uses a model, so on installations where AI is switched off or restricted to a self-hosted model it behaves accordingly.

Can supervisors complete inspections in a browser instead of on a phone?

Yes. The same form package, rules runtime and submission format are used by the Android and iOS apps and by the browser-based form viewer, which can also be embedded in another application. The difference is what the platform provides: the mobile app is offline-first with locally cached sources and push notifications, while the browser viewer fetches sources over the network and is online-only. A form built once behaves the same way in both.

What does the audit trail actually contain, and can this run inside our own network?

Each submission is tied to the published form version it was captured against, the user who submitted it, and every workflow task that acted on it, approvals, rejections, send-backs, escalations and comments, with approval e-signatures verified server-side and recorded against the task as single-use tokens. Your data sits in its own database with role-based access control and SSO, and the platform deploys on-premise, including fully air-gapped installations where no outbound connectivity is permitted and configuration updates arrive as signed offline bundles.

See your own inspection checklist running end to end